Dynamic routing protocols are supported by software applications running on the routing
device (the router) which dynamically learn network destinations and how to get to them
and also advertise those destinations to other routers. This
advertisement function allows all the routers to learn about all the
destination networks that
exist and how to those networks.
A router using dynamic routing will 'learn' the routes to all networks that are directly connected to the
device. Next, the router will
learn routes from other routers that run the same routing protocol (RIP, RIP2, EIGRP, OSPF, IS-IS, BGP
etc). Each router will
then sort through its list of routes and
select one or more 'best' routes for
each network destination the router knows or has learned.
Static
vs. Dynamic Routing
The
following briefly outlines the advantages and disadvantages of static
routing:
Advantages
of Static Routing
1.
Minimal CPU/Memory overhead
2.
No bandwidth overhead (updates are not shared between routers)
3.
Granular control on how traffic is routed
Disadvantages
of Static Routing
1.
Infrastructure changes must be manually adjusted
2.
No “dynamic” fault tolerance if a link goes down
3.
Impractical on large network
The
following briefly outlines the advantages and disadvantages of dynamic routing:
Advantages
of Dynamic Routing
1.
Simpler to configure on larger networks
2.
Will dynamically choose a different (or better) route if a link goes down
3. Ability to load balance between multiple
links
Disadvantages
of Dynamic Routing
1.
Updates are shared between routers, thus consuming bandwidth
2.
Routing protocols put additional load on router CPU/RAM
3.
The choice of the “best route” is in the hands of the routing protocol, and not
the network administrator
Routing table
A routing
table is a document stored in the router or a network computer. The routing
table is stored in the form of a database or is simply a file stored in the
router. The data entered in the routing table is referred to when the best
possible path to transfer information across two computers in a network is to
be determined. The two classifications, viz., static and dynamic routing, are
based on the way in which the routing tables are updated every time they are
used. The routers in which the data is stored and updated manually are called
static routers. On the other hand, the routers, in which the information is
changed dynamically, by the router itself, are referred to as dynamic routers.
Routing Protocol
A routing protocol is a standardized process by which routers learn
and communicate connectivity information, called routes, each of which
describes how to reach a destination host and network. Routers that
wish to exchange routing information must use the same routing protocol to
communicate routing
information.
Routing is the process of learning all the paths through
the network (routes) and using routes to forward data from one network to
another. A protocol is a standardized way to perform a task. So, a routing
protocol would be a standardized way of learning routes and moving data
from one network to another.
Routing protocols are used by routers to dynamically learn all
paths through a set of networks and forward data between the networks. Routers
are specialized computer devices designed to perform routing.
No comments:
Post a Comment