Networking Questions interview with Answer
·
BOOTP
helps a diskless workstation boot. How does it get a message to the network
looking for its IP address and the location of its operating system boot files?
·
BOOTP
sends a UDP message with a subnet work broadcast address and waits for a reply
from a server that gives it the IP address. The same message might contain the
name of the machine that has the boot files on it. If the boot image location
is not specified, the workstation sends another UDP message to query the
server.
·
What is a DNS resource
record?
·
resource record is an
entry in a name server's database. There are several types of resource records
used, including name-to-address resolution information. Resource records are
maintained as ASCII files.
·
What
protocol is used by DNS name servers?
·
DNS
uses UDP for communication between servers. It is a better choice than TCP because
of the improved speed a connectionless protocol offers. Of course, transmission
reliability suffers with UDP.
·
What is the difference
between interior and exterior neighbor gateways?
·
Interior gateways connect
LANs of one organization, whereas exterior gateways connect the organization to
the outside world.
·
What
is the HELLO protocol used for?
·
The
HELLO protocol uses time instead of distance to determine optimal routing. It
is an alternative to the Routing Information Protocol.
·
What are the three types
of routing tables and what are the advantages and disadvantages of these?
·
The three types of routing
tables are fixed, dynamic, and fixed central.
A fixed table must be manually modified every time there is a change.
A dynamic table changes its information based on network traffic, reducing the amount of manual maintenance.
A fixed central table lets a manager modify only one table, which is then read by other devices. The fixed central table reduces the need to update each machine's table, as with the fixed table. Usually a dynamic table causes the fewest problems for a network administrator, although the table's contents can change without the administrator being aware of the change.
A fixed table must be manually modified every time there is a change.
A dynamic table changes its information based on network traffic, reducing the amount of manual maintenance.
A fixed central table lets a manager modify only one table, which is then read by other devices. The fixed central table reduces the need to update each machine's table, as with the fixed table. Usually a dynamic table causes the fewest problems for a network administrator, although the table's contents can change without the administrator being aware of the change.
·
What
is source route?
·
It
is a sequence of IP addresses identifying the route a datagram must follow. A
source route may optionally be included in an IP datagram header.
·
What is RIP (Routing
Information Protocol)?
·
It is a simple protocol
used to exchange information between the routers.
·
What
is SLIP (Serial Line Interface Protocol)?
·
It
is a simple protocol used for transmission of IP datagrams across a serial
line.
·
What is Proxy ARP?
·
It is using a router to
answer ARP requests. This will be done when the originating host believes that
a destination is local, when in fact is lies beyond router.
·
What
is OSPF?
·
It
is an Internet routing protocol that scales well, can route traffic along
multiple paths, and uses knowledge of an Internet's topology to make accurate
routing decisions.
·
What is Kerberos?
·
It is an authentication
service developed at the Massachusetts Institute of Technology. Kerberos uses
encryption to prevent intruders from discovering passwords and gaining unauthorized
access to files.
·
What
is a Multi-homed Host?
·
It
is a host that has a multiple network interfaces and that requires multiple IP
addresses is called as a Multihomed Host.
·
What is NVT (Network
Virtual Terminal)?
·
It is a set of rules
defining a very simple virtual terminal interaction. The NVT is used in the
start of a Telnet session.
·
What
is Gateway-to-Gateway protocol?
·
It
is a protocol formerly used to exchange routing information between Internet
core routers.
·
What is BGP (Border
Gateway Protocol)?
·
It is a protocol used to
advertise the set of networks that can be reached within an autonomous system.
BGP enables this information to be shared with the autonomous system. This is
newer than EGP (Exterior Gateway Protocol).
·
What
is autonomous system?
·
It
is a collection of routers under the control of a single administrative
authority and that uses a common Interior Gateway Protocol.
·
What is EGP (Exterior
Gateway Protocol)?
·
it is the protocol the
routers in neighboring autonomous systems use to identify the set of networks
that can be reached within or via each autonomous system.
·
What
is IGP (Interior Gateway Protocol)?
·
It
is any routing protocol used within an autonomous system.
·
What is Mail Gateway?
·
It is a system that
performs a protocol translation between different electronic mail delivery
protocols.
·
What
is wide-mouth frog?
·
Wide-mouth
frog is the simplest known key distribution center (KDC) authentication
protocol.
·
What is silly window
syndrome?
·
It is a problem that can
ruin TCP performance. This problem occurs when data are passed to the sending
TCP entity in large blocks, but an interactive application on the receiving
side reads 1 byte at a time.
·
What
is region?
·
When
hierarchical routing is used, the routers are divided into what we call
regions, with each router knowing all the details about how to route packets to
destinations within its own region, but knowing nothing about the internal
structure of other regions.
·
What is multicast routing?
·
Sending a message to a
group is called multicasting, and its routing algorithm is called multicast
routing.
·
What
is traffic shaping?
·
One
of the main causes of congestion is that traffic is often busy. If hosts could
be made to transmit at a uniform rate, congestion would be less common. Another
open loop method to help manage congestion is forcing the packet to be
transmitted at a more predictable rate. This is called traffic shaping.
·
What is packet filter?
·
Packet filter is a
standard router equipped with some extra functionality. The extra functionality
allows every incoming or outgoing packet to be inspected. Packets meeting some
criterion are forwarded normally. Those that fail the test are dropped.
No comments:
Post a Comment