How to configure a DNS
server on Windows!
Welcome to the World of Linux Server Management,
Windows Server Management, Kernel Programming, Ethical Hacking, Cloud
Solutions, Vmware Vsphere ESXi, Xen Servers, Server hardening, Server
administration etc.,
Active directory
clients locate need DNS for locating the domain controllers. While promoting
the stand alone server to the domain controller, the DNS is installed
automatically. In this article we will learn that how to install and configure
the DNS separately. For managing the name resolutions in your network,
you need to understand the host names, primary, secondary and stub zones, root
name server, resource records, delegation and dynamic updates.
Secondly, you will
need to know how to configure zones, how to monitor the DNS server,
understanding cache only server and implementing a delegating zone. DNS
uses two different types of processes to resolve the queries recursive and
iterative.
Installation
§ Click Start > Settings > Control Panel > and Double
click Add/Remove Programs
§ Click Add/Remove Windows components. Windows component
wizard will start now click Next.
§ Now click Networking Services and click Details button.
§ Select the Domain Name System in the list and click ok.
§ Start the server setup. The DNS server files will be
copied to the computer.
After the installation
has been completed, you need to test, whether it is successful or and you are
able to resolve the names or not. There is a built-in utility “NsLookup”
that is used to check whether the installation and configurations are okay or
not.
How to Configure DNS
The following steps
will tell you that how to configure the DNS in your Windows 2003 server.
§ Click Start > Programs > Admin Tools and click DNS
manager. DNS server configuration wizard will start automatically and if
the wizard does not start automatically then right click your server name and
click configure your server.
§ Choose, add a forward look up zone and click next. The new
forward lookup zone to accept the dynamic updates, Click next.
§ Use the zone name exactly same as your active directory domain
name. Type the domain name and click next. The zone name should
match your local subnet id and click next.
§ Add a reverse lookup zone and click next.
§ Now accept the default name of the new file and click next.
§ Now click finish to complete the DNS configurations.
The next step is to
accept the dynamic updates for the forward and reverse lookup zones.
How to Enable Dynamic
Updates
§ Click DNS Manager and expand the DNS server objects.
§ Expand the forward lookup zone folder.
§ Right click your forward lookup zone name and click properties.
§ In the general tab, select “Allow dynamic updates” check box and
click ok.
§ Perform the same steps for the Reverse Lookup zone.
How to Enable DNS
Forwarding on the Internet
§ In the DNS console, right click the DNS server object and click
Properties.
§ Now, click the forwarders tab.
§ Enter the IP address of the DNS servers in the IP address
box. The IP addresses for the DNS forwarding are usually of your local
ISP.
§ You can add multiple forwarding IP addresses, and the address
which is on top will be given priority.
§ Click ok to finish the DNS forwarding.
No comments:
Post a Comment